Arduino Winch
£200.00
If you ever need to drop off packages to hard to reach heights, depths or over difficult or hazardous terrain, Tronsys winch is the simple, smart technology you need with ground detection sensor.
Out of stock
Description
Tronsys winch has both manual and autonomous mode to deploy and retract. Autonomous functions is provided for through a single lead connection by pulsing PWM values for retract and deploy. Fully compatible with Mission Planner Do-Set-Servo commands. The winch has onboard, spring loaded ground detection sensors. The sensor relies on rope tension to determine ground contact in order to automate retraction without operator intervention. Also has end of rope proximity sensor to auto stop during retraction. The operator can easily override autonomous functions at any time using RC manual controls. Aerial drop off’s from over 30m has been achieved.
Specification
- Payload limit : 1kg
- Input Voltage : 6S
- Weight : 1.2 kg
- Size : 20o x 300 x 60 (mm)
- Deployment and retraction : Speed 1 m/s approx. (Depending on payload )
- Fixings 84mm x 84 mm For Tronsys Frames (M3 Stand offs)
- JST power connector
- Green wire : Autopilot servo out pin for autonomous PWM commands (eg. Mission planner Do-Set-Servo)
- Blue wire : Autopilot servo out pin for RC manual override
Additional information
| Weight | 2 kg |
|---|---|
| Dimensions | 30 × 23 × 15 cm |
Reviews
There are no reviews yet.